MO-coupling for mobile fences MO06 in Ukraine

The total height is 4350 mm. Weight - 48.4 kg. Included:- Two ball lamps with a diameter of 300 mm or 350 mm- Decorative polymer plinth with symbols of fertility and abundance and two polymer decorative lantern holders - anti-corrosion, 200 frost cycles.- Metal pipe (diameter 76mm, wall thickness 3mm) on a round plate for installation (thickness 3mm), durable powder coating.- Strong embedding plate for concreting with a thickness of 8 mm- A loop for connecting wires- Wire inside the street lamp..

Weight, kg: 18Polymer sandSize, mm: 490x390x130mm, blackHoles, mm: Ø60, Ø48, 30x30, 40x40, 60x60Frost resistant -40C to + 60CUV resistantFor road use..

Square road sign Sign base material - galvanized steelsheet thickness 0.8mmType of reflective for Square road sign  Temporary reflective - service life 1-2 yearsReflective film Orafol 6710 class 1-b - service life 7 years, DSTU 4100Standard size of the Square road sign to DSTU 4100:2021:І standard size - the length of the sides of the sign B= 600mmІІ standard size length of sign sides В= 700mmІІІ standard size length of the sides of the sign H = 900mmIV standard size length of sign sides H = 1500mm only signs 5.81.1, 5.81.2)Priority signs, informational signs:Standard size I, II, III with internal olyamisk - 2.3, 2.4, 7.1.2, 7.8, 7.25Standard size I, II, III - 2.6, 5.5, 5.6, 5.32.1 - 6.32.3, 5.38.1, 5.38.2, 5.42.1Standard size I, II - 5.13 - 5.15, 5.28Size II, III - 5.8 - 5.12, 5.18, 5.20.1 - 5.23, 5.29, 5.30, 5.33, 5.39, 5.40.1 - 5.41.2, 5.42.2 - 5.42.5Standard size I - 5.36, 5.37Standard size IV – 5.81.1, 5.81.2Additional accessories for Square road signSet of fastenings of the sign to the pipeMetal stand or bracket for mounting the sign.Temporary mobile support for one sign PO1Metal temporary support for 2 traffic signs PO2..

DB05-adapter for DF02 flashlight..

If it is impossible to dismantle the curb, rubber ramps are used to drive onto the curb. Durable, non-corrosive, maintenance-free, rubber ramps are used to organize ramps / ramps on curbsat intersections and pedestrian crossings for people with limited mobility and cyclistsfor cars when organizing parking on the sidewalk or driving to the territory.Rubber ramp PR-1 for driving onto a curb, characteristics:Rubber ramp PR1 is designed to be installed in front of a curb 12 cm and higher.Length 700mm.The rubber ramp has a height of 120mmdepth 195mmweight 9.5kgThis model of ramps has a height of 12cm and the ability to install the side parts of the ramp, for a smooth sideways drive.The rubber ramp PR-1 is suitable in a place where the height of the curb is 12 cm and a little higher.The central part of the PR1 rubber ramp has 3 holes for fitting into the road surface.ZUSTRICH  delivery Kiev, Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Mukachevo, Lutsk, Rivne ..