Recently viewed

RKS01 rubber combined wheel bumper side part 610mm

86771

It is used together with the central parts of the RKS02 prefabricated wheel chippers.Rubber prefabricated wheel chippers - to a warehouse, parking lot, garage or on the road.The side part of the prefabricated rubber wheel bumper is used in the construction of continuous lines of the rubber delineator, delimiting access to a certain area as a final element.The 1.8 meter long rubber wheel bumper for a parking space PKS03 uses two such side elements PKS01.It is also possible to build a stop for wheels with a length of 1.2 meters by connecting two end sections of the PKC01 to each other.The section height of 14.5 cm allows you to create safe traffic corridors and ensure the safety of walls, corners and vehicles in the parking lot, garage, warehouses and industries.Rubber delineator, consisting of rubber bumpers RKS01 and RKS02 is used:for dividing traffic lanes at the entrances to the parking lotwhen separating bike lanesin warehouses, parking lots, garages and factories - to preserve walls and corners by building a continuous rubber line along the walls and corners of buildings and garagesto protect the barrier from collisionto protect the walls in the garageCharacteristics of the rubber stop for wheels RKS01:Length 610mm.Width 145mmHeight 120mmWeight 6.2kgLoading up to 3.5 tonsTwo reflective elements on both sidesTogether with the central part PKS02 is folded into a rubber delineator of any length.Buy a prefabricated rubber stop for wheels at a low price in UAHIn order to buy a rubber delineator - lateral RKS01, as well as the central part of the RKS02 delineator and fasteners for mounting KR02 at a low price in UAH - choose the quantity and place an order online.Or call!Prefabricated rubber wheel bumpers for warehouses, factories, parking lots and garages are available...

Price type

Price excluding VAT

Price including VAT +86.00 грн

640.00 грн

VRD-2-II-P1 road stud

87123

Plastic road stud with red reflectors on both sides - VRD-2 marking according to DSTU 4036.Where are road stud with two red VRD2 reflectors installed?Inserts with two red reflectors are appliedat roundabouts on both sides of the road,on one-way sections of roads with a dividing strip on both sides of the road100 meters away at the entrance to the security islands.The distance between the inserts on the ring is 1-2 meters, depending on the curvature of the diameterPlastic road stud VRD-2-II-P1, characteristics:Reflective element - color: red-redMaterial - PPCType according to DSTU 4036-2001: Type IIHeight, mm: 20Dimensions, mm: 105x105x20Weight, g: 110Installation method - on anchors in the road surfaceTwo anchors for installation includedRed reflectors for roundabout in stock ..

Price type

Price excluding VAT

Price including VAT +34.00 грн

Wholesale prices 30-100-500+ pcs upon request

170.00 грн

LT03 Retractable Belt Barrier with black tape 3m

83110

Belt Barrier with a larger base diameter compared to the standard LT02 series.Tape length 3 metersIncluded - one Belt BarrierRibbon 3m, width 5cmStand height 960mmBase diameter 350mmWeight 10kgAirport Belt Barrier with a black pull tape 3m - LT03 are in stock and available to buy wholesale and retail from a warehouse at a low price in UAH..

Price type

Price excluding VAT

Price including VAT +480.00 грн

2,400.00 грн

Crowd control bariers for warehouses- low price in UAH

Tape fences for the organization of space in warehouses and parking lots.

There are two types of tape fences -

indoor fences and so-called street fences.

The use of strip fences indoors provides a long service life of metal racks. When used outdoors, it is recommended to install special road tape fences, the body of which is not made of metal, but of plastic and rubber. Exceptions are summer parking lots, where the zones on the street are temporarily demarcated and where it is possible to move the racks to a dry room in rainy or winter weather.

In warehouses as fences are usually used:

    plastic fences with exhaust tapes of the LTP series,
    wall tensors of the NT series
    KOH series toppers used in conjunction with road cones