Mobile temporary building fences MO06 MO06 - section 3.5 m, height 2 meters - in stock

Stainless removable posts 50cm ST02-N-500.The most demanded model among road removable columns.Stainless steelFeatures of removable poles ST02-N-500:to remove the post from the starting point, you need to turn the beak in the lock, turn and lift the post upthe pole is completely removed from the setting point, and also placed on the installation point only by turning the pole and fixing it with a keythe lock in the top part of a column - a guarantee of the most long service life. During road works, especially in winter, when the road surface is treated with reagents, the lock remains inaccessible to dirt and water.stainless steel bodySharing with fixed poles - recommendations:For public utilities, as well as any other services, including rescue ones, having access to the opening of removable road barriers, it is important to single out removable ones among the many stationary pillars in a matter of seconds.When organizing the passage on the sidewalk, it is recommended for use in conjunction with stationary stainless steel poles SNB500-83 (50 cm high, 83 mm in diameter), as well as SNB750-83 (75 cm high, 83 mm in diameter).Visual differences that will distinguish the removable column ST02-N from the stationary SNB:slight difference in diameter (7mm) and alsothe difference is in shape (stationary SNBs have a flat top, while removable ones have a rounded one).No matter how long the lines with stationary poles are, the special services will quickly be able to navigate and organize passage to the required area.Removable portable column (stainless steel) - installation featureswhen concreting the base part, we recommend using the post in the assembled state, i.e. the removable part of the post must be inserted into the baseit is necessary that the plinth be 2-3 mm higher than the road surface to avoid sewage ingressit is necessary to ensure that the installation site of the removable pole is not lower in level than the surrounding road surface in order to prevent sewage from flowing therewhen installing an additional plinth for transferring a removable pole into it for the time, it is also necessary to observe all the points listed above.Removable column portable ST02-N-500 (stainless steel) - characteristicsBuilt-in lock, 3 keysOne secret is possible for any number of pillars - opening all with one key.Cover for plinth includedHeight 500mm, pipe diameter - 76mmUnderground - 250mmPost - stainless steel, underground plinth - metalIt is possible to additionally install underground plinths and rearrange the columns from one place to anotherBuy a removable column at a low price Road poles available. We send all over Ukraine. Pickup possible.We work with payers and non-payers of VAT.In order to buy removable poles, place an order online, by mail or by phone / messengers...

The DSTU norms prescribe the observance of safety measures at the facilities for carrying out repair and construction work, including temporary ones. If it is necessary to introduce safety measures with the help of emergency signal nets, signal strips and lanterns in places in temporary work on an unstable road surface, metal pins holders are used, which are deepened into the road surface for fixation.A metal holder for a signal net, tapes and emergency lights DSM06 is a universal solution to the issue of fixing emergency fences in places without a solid, even road surface.Metal post holder for emergency net and flashlights - where is it used?It is used by utilities, energy supply services, water utilities, road services and construction companies to fence off hazardous areas in accordance with DSTU in conjunction with:plastic signal netsroad signal lightssignal tapesHow to fix signal nets, tapes and lanterns? - metal pin holder for emergency net and DSM06 flashlights.Metal holder for emergency equipment DSM06 is used in places with a ground surface. The immersion depth is about 50cm. If necessary, the immersion depth can be changed depending on the requirements of the object.Fastening of signal nets, tapes and lanterns to the DSM06 metal pins is carried out using clamps (not included in the delivery set)The total height of the metal holder for fixing the emergency nets and lanterns is 1.5 meters. This height allows the pin to go 50 cm into the road surface and have 1 meter above the ground, sufficient to reinforce a plastic signal mesh or an autonomous road emergency flashing light.The metal mesh poles are reusable, just like any other portable road fence can be moved to another place of use.Metal pole for mesh, tapes and lights DSM06 - Features:Metal holder for emergency equipment, underground immersionOverall length, mm: 1500Diameter, mm: 16With holderSuitable for signal nets PS01, PS01-7, signal tapes and emergency road lightsWeight 1.1 kgMilestone color - signal redMetal pin holder for net and road lights - how to buy in UAH in Ukraine?We have production facilities and constant availability in the warehouse for the prompt closure of objects of any complexity.In order to buy metal holders for a plastic emergency mesh, place an order online, by mail or call.Prompt self-pickup is possible. We deliver all over Ukraine.Low price in UAHZUSTRICH  Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne..

Flexible traffic bollards orange DS43+KR with mounts     Premium quality TPU - maximum flexibility and enhanced UV resistance     The column is fully restored after a collision     Mounting brackets included     Marking according to DSTU: SO-P-1.0 DSTU 8751 (fencing post)Characteristics:Height, mm: 1000Diameter, mm: 80Base diameter, mm: 200Color: orange red4 reflective stripesAnchor holes, pcs: 33pcs mounting brackets includedMaterial: TPUWeight, kg: 1.5 ± 0.1Flexible traffic bollards Premium TPU DS43+KRFlexible orange road bollard DS43+KR made of TPU with a height of 1 m is a reliable and versatile solution for marking and fencing road sections.Made from durable TPU material, the bollard is highly flexible and retractable, allowing it to flex when hit by vehicles and return to its original position without damage. Marking according to DSTU SO-P-1.0 DSTU 8751 ensures compliance with the standards and requirements for traffic signaling. Fastenings in a set provide simple and reliable installation of a column on a road surface.Flexible orange road bollard DS43+KR is an effective tool for ensuring safety and bright visual signaling on the roads.ZUSTRICH ..

Zinc-carbon battery 4R25 for signal road lamp DF01Capacity, Ah: 7Weight, kg: 0.47Size, mm: 67x67x114mm  ..

We make racks with individual ribbons with a logoIn order to apply for a layout, after ordering, you must send an email to:    company logo in curves    ribbon main color and logo color    if there is - then wishes for placement on the tape.After the layout is approved, we print tapes and prepare cassettes with individual tapes for racks - in terms of time, this is up to 7-14 days. The time of production of tapes with logos and a complete set of racks depends on the volume of the order, the workload of production and the timing of the customer.We also close urgent objects if necessary.Logos are printed on the tape using the silk-screen method, which allows you to get clear drawings and inscriptions on the tape.Characteristics of a rack with a tensator tape - an individual tape with a logo print LTM01:The set includes one stand made of ferrous metal (powder coated in black) with an exhaust tensator tape in an individual color or with a logo.Tape length, m: 2Tape width, cm: 5Rack height, mm: 900base Ø, mm: 320Base height, mm: 45Weight, kg: 8ZUSTRICH ..

Tape protections - a Crowd control barriers with a red-white tape of 3 meters LTM02. Includes one black metal stand (powder coated in black)Built-in tape, color: red-whiteTape length, m: 3Tape width, cm: 5Rack height, mm: 910base Ø, mm: 320Base height, mm: 45Weight, kg: 8To buy tape fences in Ukraine at a low price in UAH, place an order online, by mail or by phone.Crowd control barriers available..

In a set: one rack with an exhaust tensor tapeTape length 2.5 m, width 5 cmRack height 910 mmDiameter of the basis is 320 mmWeight 8kg..

Built-in lock, 3 keysOne secret is possible for any number of pillars - opening all with one keyHeight of the overground part, mm: 750Pipe diameter, mm: 76Metallic, powder coated, orange color.Underground part (metal base), mm: 250To fix the removable column in another place, it is possible to additionally purchase plinths - the underground part of the removable column.Poles in stock..

Road  stud VRD-1-II-P1Reflective element - color: red-whiteMaterial - PPCType according to DSTU 4036-2001: Type IIHeight, mm: 20Dimensions, mm: 105x105x20Weight, g: 110Installation method - on anchors in the road surfaceTwo anchors for installation includedRoad  studs with reflectors available   ZUSTRICH  ..

The wheel bumper is metal with powder coating in one colorIt is used to protect columns up to 35 cm wide.Depth - 300 mmOuter width - 600 mmHeight - 400 mmThe diameter of the pipe is 76 mm, the wall thickness is 3 mPlate for installation 150mm x 150mm, thickness 4mm, holes 12mm..

Sectional plastic chairs with backrest CT04 for 4 seatsNumber of seats - 4Section length 1950mm.Height 680mmDepth 500mmWater drainage holesSize of one seat: Height x Width x Depth = 300x480x400mm ..

The high parking cone is used both in parking lots and during road repairs. A wide reflective strip, occupying 30% of the cone height, with a total height of 80cm and a weight of 2kg, makes this traffic cone highly visible and stable.Parking cone KD11 - characteristics:Plastic high KD-11Height 800mmBase 400x400mmOne wide reflective stripWeight 2kgIn stock ZUSTRICH  Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

Additional plinth for removable columns - metal.For convenient movement of columns from one place to another.With water drainage system - without bottomReinforcement at the bottom criss-cross for strong concretingsuitable for all removable poles ST02 - stainless, hammer and powder..

Bumper metal with powder coating in one colorLength, mm: 1500Height, mm: 150Ø, mm: 108Wall thickness, mm: 3Plate for installation, mm: 150х150х4Holes for installation, pcs: 8Ø of holes for installation, mm: 12Weight, kg: 17 ZUSTRICH  Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne..

PT-K2-14.4 two-component adhesive for polyurethane tactile tiles - characteristics:Weight kg: 14.4 (component A 12.6 kg + component B 1.8 kg)It is consumed approximately for 48-50 m2 of PT.The temperature of the surface on which the polyurethane tactile tile is glued must be at least +10 СCuring speed, hours: 24Polyurethane adhesive for tactile tiles PT-K2-14.4 is suitable for indoor and outdoor use. The working temperature of the glue is from +10 C and above. The two components of the adhesive are mixed immediately before being applied to the tiles. The surfaces are pre-degreased.Polyurethane adhesive for flexible tiles PT-K2-14.4 in stock and available to buy from a warehouse at a low price in UAH.ZUSTRICH  Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..