Column road portable DS20-R available,price in UAH

The total height is 4500mm. Weight - 59.4 kg. Included:- Three large polymer lanterns 550mm x 380mm with anti-vandal glass,decorative polymer base and three polymer lamp holders.The lamp, base and holders are anti-corrosion, withstand 200 frost cycles.- Metal pipe (diameter 76mm, wall thickness 3mm) on a round plate for installation (thickness 3mm), powder coating.- Strong embedding plate for concreting with a thickness of 8 mm- A loop for connecting wires- Wire inside the street lamp..

It is used to build lines of rubber delineators, to separate traffic lanes, including oncoming lanes at the entrance to a garage or parking lot, to separate bike lanes.Rubber delineator for separating traffic lanes - RKS02 wheel stopsIt is a delineator for bicycle paths, safely separating the carriageway and the bicycle part of the road, or the bicycle and the pedestrian.It is also an integral element in the RKS03 rubber wheel bumper 1.8 meters long as its central part.Continuous lines of rubber wheel chocks for warehouses, garages and car parks make it safe to move in narrow areas and also save corners, walls, columns and vehicles. Our RKS rubber dividers are used as separators for bike paths, separators of oncoming traffic lines before parking entrances.They are also used in conjunction with rubber bollards as delineators of oncoming traffic lanes in the city - they are installed in the following order: RKS delineators - rubber bollards DS42 (DS43) - and again a rubber delineator. This is how lines are formed that streamline traffic as much as possible and contribute to maintaining the lane of traffic without colliding with road dividing posts.Such delineator lines can also be installed along cycle paths, ensuring maximum traffic safety for cyclists on the cycle path.Rubber delineator - central part RKS02 - characteristics:Length 610mm.Width 145mmHeight 120mmWeight 6.2kgLoading up to 3.5 tonsTwo reflective elements on both sidesTogether with the side part (RKS01) it folds into a rubber delineator of any lengthRubber wheel stors RKS02 - buy at a low price in UAH:Dividers for bike paths, dividers for oncoming traffic lanes - in stock and available to buy at a low price in UAH.We promptly send all over Ukraine. Pickup possible.We will deliver:Kyiv, Odessa, Lviv, Kharkiv, Dnipro, Boryspil, Vinnitsa, Shostka, Pervomaisk, Zaporozhye, Rivne, Chernigov, Brovary, Chernivtsi, Radekhiv, Sambur, Rakhiv, Dublyany, Uman, Krivoy Rog, Sumy, Nikolaev, Mirgorod, Zhashkov, Pryluky , Pavlograd, Kremechug, Sofiyivska Borschagovka, Petropavlovska Borschagovka, Kirovograd, Svetlovodsk, Cherkasy, Rivne, Mukachevo, Konotop, Lozova, Kherson, Bucha, Irpen, Berezanka, Chaplynka, Zdolbunov, Melitopol, Brovary, Cherry, Vinnitsa, Ugledar, Simferopol, Sevastopol , Yalta, Alushta, Kerch, Ternopil, Ukrainka and all other cities and villages of Ukraine...

Portable Plastic Ramp PP1300 for Wheelchairs, Trolleys, and BicyclesThe Portable Plastic Ramp PP1300 is a reliable, durable, and convenient solution for overcoming thresholds, curbs, and other obstacles with heights ranging from 5 to 20 cm. This ramp is ideal for use in both public and private spaces, providing comfort and safety for those using wheelchairs, trolleys, or bicycles. Thanks to its lightweight design and compact size, the PP1300 ramp is easy to transport and install.Mobile portable ramp for driving onto curb PP1300 - technical characteristics:For smooth driving onto curb from 5 cm to 20 cmLength of drive, mm: 700Width of drive, mm: 1300Height, mm: 85Weight, kg: 13PlasticYellowWith handles for transportationReinforced with metal plates on the back sideMaximum load 500 kgKey Features:Material: The ramp is made of high-strength plastic reinforced with metal inserts for added rigidity and durability. This ensures that the structure can withstand heavy loads and resist deformation during use.Dimensions: The ramp measures 1300 mm in length, 700 mm in width, and 85 mm in height, allowing for easy transportation and installation without the need for special tools.Weight: Weighing just 13 kg, the ramp is easy to carry and install without requiring significant effort.Built-in Handles: For convenient transportation, the ramp is equipped with built-in handles, allowing it to be quickly and comfortably moved from one location to another.Load Capacity: The ramp can support loads of up to 500 kg, making it suitable for use with various types of wheelchairs, shopping trolleys, and bicycles.Color: The ramp comes in a bright yellow color, making it easily visible even in low light conditions, enhancing safety in public spaces and outdoor environments.Application: The ramp is designed to help overcome thresholds, curbs, and ramps with heights ranging from 5 to 20 cm. It is suitable for use in residential homes, offices, shopping centers, educational and medical institutions, parking lots, and public spaces.Advantages of the PP1300 Ramp:Strength and Durability: With metal reinforcements, the ramp can withstand heavy loads without deformation over time. Its surface is resistant to mechanical damage and weather conditions, making it suitable for both indoor and outdoor use.Ease of Transport: The 13 kg weight and built-in handles make the ramp easy to transport and convenient to use. Its compact size also makes storage easy when the ramp is not in use.Safety: The bright yellow color makes the ramp highly visible in any environment. The non-slip textured surface provides reliable traction for wheelchair or bicycle wheels, ensuring additional safety during use.Versatility: The ramp is suitable for a wide range of users. It can be used with wheelchairs, trolleys, bicycles, and other mobile equipment. Its high load capacity allows it to safely support both people and heavy objects.Maximum Slope Angle of the RampOne of the key characteristics of any ramp is the slope angle, which affects the safety and comfort of use. For the PP1300 ramp, with a length of 700 mm and a maximum height of 20 cm, the slope angle is 16.04 degrees. This angle provides a smooth and safe ascent over thresholds or curbs, minimizing the risk of slipping or losing balance.Usage RecommendationsThe PP1300 ramp can be used as a temporary or permanent solution in areas with regular traffic of people using wheelchairs and trolleys. It is especially useful in the following situations:In office buildings and business centers, where ensuring accessibility for all visitors is essential.In residential homes, especially at entrances with high thresholds or steps.In shopping malls and stores, where there are thresholds or small steps at entrances.In educational and medical facilities, where the safety and comfort of patients and visitors are a priority.Easy InstallationOne of the main advantages of the PP1300 plastic ramp is its ease of installation. It does not require special tools or complex setup. The ramp can be easily placed on any flat surface in front of a threshold or curb, providing immediate access for wheelchairs and trolleys. Additionally, it can be quickly relocated and installed in a different location if needed.ConclusionThe Portable Plastic Ramp PP1300 is a versatile and reliable solution for overcoming thresholds and curbs up to 20 cm high. Its durable construction, ease of transport thanks to built-in handles, and high load capacity make it the ideal choice for use in private and public spaces...

DZ-1000-K survey spherical road mirror - 1000mmRoad mirror DZ-1000-K is a large viewing spherical mirror with a visor, designed to ensure safety on roads and other places with increased traffic, including at high speeds, where it is necessary to ensure a viewing range.The spherical shape of the mirror surface provides a wide view around, allowing you to observe what is happening on the road section from different angles. The diameter of the mirror surface is 1 meter, which provides the widest possible view and increases safety on the road.The visor on the top of the mirror protects it from precipitation and other contaminants, ensuring clear vision in any weather.Road mirror DZ-1000-K is ideal for use on roads, parking lots, industrial facilities and other places where monitoring the situation and safety is necessary.Characteristics of the road spherical mirror DZ-1000-K For outdoor and indoor useWith visorSize (Ø 1000), mm: 1000х1000х145Net weight, kg: 6,32Case material: plasticMirror body color: orangeMirror surface material: polycarbonateDistance combination, m: 37Fastenings for 76 mm pipe includedSpherical road mirrors - care instructionsJust like cars, road spherical mirrors require regular maintenance. Although they are located high above the ground and are not subject to contamination, dust still settles on them over time, which leads to loss of image clarity. To maintain perfectly clear vision, it is recommended to periodically wash the mirror with a solution of soapy water. After cleaning, the mirror should be wiped with a dry cloth to avoid streaks and ensure a clear image...

Plastic traffic cone KD07-60 1 white and one reflective stripeCone material - plasticHeight 600mmBase diameter 275mmOne white and one reflective stripeTraffic cone weight 0.7 kgBuy a road cone at a low price in UAH.Constant availability in the warehouse of any volume ZUSTRICH Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

Signal pole DS6-32-1500 (1.5 m) — a tall, durable traffic accessory for driving schools, parking areas and road works. Reflective stripes ensure high visibility both day and night, making it ideal for safety training and temporary traffic control...

Traffic cones rubber flexible heavy KDMK05 + - the choice of road services:heavy enough to withstand wind loads at 52cm heightvisible due to cone height 52cmvisible in the dark - two reflective stripes on the coneFlexible cone KDMK-05 + with a weighting agentHeight 520mmTwo reflective stripesSquare base 290x290mmWeight 1.4 kgOperating temperature -50С + 60СFor public roadsTraffic cones rubber flexible heavy KDMK05 + are available to buy at a low price in UAHAny volumes are available for the prompt closure of objects of any complexity ..

We print individual ribbons with company logos.For printing, you must provide the company logo in curves, the color of the ribbon and your wishes. We send the layout of the tape, which, after confirmation, is sent to print. Term of printing logos on ribbons - up to 14 daysIncluded - one rack with an exhaust tensator tape with a logoTape length 2m, width 5cm.Stand height 910mmBase diameter 320mmWeight 8kg..

Stainless steel body.Included: Wall-mounted tensator with a 4 m long pull-out tape and a fastener that is mounted on the opposite wall.The tape is removed from the tensator and attached to the fastener, thereby blocking access.Tape color - redTape length - 4 metersIn stock..

UNI 450 cap for outdoor and indoor useWith a visorCase diameter, mm: 4500gross weight, kg: 1.857mm pipe mounts includedManufacturer Czech Republic..

Plastic screen for bumpers against glare from headlights - EP01 Z-P/0.9 anti-dazzle screenGreen, strong HDPE plasticHeight, mm: 900Length, mm: 220Width, mm: 50Weight, kg: 2.7UV resistant, temperature range -60С - +60СComplies with DSTU 8537:2015, DBN V.2.3-4:2015, PN-EN 12676-1:2003/A1:2005High molecular weight polyethylene of low pressure, resistant to UV radiation, weather-resistant, impact-resistant.Mounted on support rails EP-01-3950 (on 11K, 11DD, 11ME, 11MD and concrete fences) - 6 pcs on a support (type I)Anti-dazzle screens for fenders in stockand available to buy at a low price in UAHPlace an order online or callWe quickly send all over Ukraine, self-pickup is also possible..

The total height is 3350 mm. Weight - 33.3 kg. Included:- Ball lamp with a diameter of 300 mm or 350 mm- Decorative polymer plinth with symbols of fertility and abundance, anti-corrosion, 200 frost cycles.- Metal pipe (diameter 76mm, wall thickness 3mm) on a round plate for installation (thickness 3mm), powder coating.- Strong embedding plate for concreting with a thickness of 8 mm- A loop for connecting wires- Wire inside the street lamp..

Stainless steel body.Included: Wall-mounted tensator with a 5 m long pull-out tape and a fastener that is mounted on the opposite wall.The tape is removed from the tensator and attached to the fastener, thereby blocking access.Tape color - yellow-blackTape length - 5 metersWeight - 700grIn stock..

PT12-400x400 polyurethane tactile tiles strip 400x400mm - characteristics:Tactile tiles, for outdoor and indoor useNon-slip surfaceFire resistance of tiles, class: B2Production material: durable high quality flexible polyurethane.Tile installation type: overheadHeight, mm: 8 (3 + relief 5)Size, mm: 400x400Pattern: Tactile guide tileAn overhead tactile tile polyurethane PT12-400x400 is available to buy at a low price in UAH.In stock.Polyurethane tactile guide tiles are among the most important tactile indicators that can help the visually impaired. Guiding tactile tiles help visually impaired people to make sure they are following the right path. These polyurethane tactile directional indicators are very important and also helpful for the visually impaired when they get lost and can't find their way. This is one of the safest and at the same time useful products for people with low vision. That is why tactile indicators are prescribed in the state standards DBN V.2.2-40:2018, DSTU ISO 23599:2017, DSTU 23599, DBN V.2.2-40.Polyurethane tactile tiles are a unique product specially designed for indoor and outdoor floors. Its surface is easy to detect due to its high visual contrast with the floor. The tactile tile protector is suitable for wheelchairs and eliminates the risk of tripping. Tiles are glued to existing floors or surfaces without damaging them. Can be placed on platforms, stairs, ramps, corridors, elevators, etc.Polyurethane Tactile Direction Signs are durable tactile signs designed to help the visually impaired to provide them with a stable path to indicate the correct direction or any specific danger near them. Polyurethane tactile tiles are easy to install on various platforms, escalators, ramps, stairs and many other places to facilitate the movement of visually impaired people in public places. The polyurethane tactile direction indicators also have raised stripes to make them easy to feel for the visually impaired. These features make this product very tactile and comfortable to use.We also produce polyurethane guide tactile tiles and tiles in the size of 30x30 centimeters:PT14-400  - polyurethane tactile tiles 400 x 400 mmPT14 - polyurethane tactile tile 300 x 300 mm with dot protectorPT12 - polyurethane tactile tiles 300 x 300 mm with convex stripes (guide) ZUSTRICH Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

Road Mirror DZ-UNI1000The Road Mirror DZ-UNI1000 is a universal safety solution designed to improve visibility on roads, parking areas, industrial zones, and locations with restricted sightlines. Its 960 mm diameter ensures a wide viewing angle, helping to prevent accidents at intersections and driveways.Made from impact-resistant Plexiglas XT acrylic, this mirror is highly durable, UV-resistant, and weatherproof. It comes with a 57 mm pipe mount, allowing for quick and hassle-free installation.UNI 1000 cap for outdoor and indoor use. Attachment to pipe Ø60mm includedWith a visorCase diameter, mm: 980Ø of the mirror surface, mm: 960Net/gross weight, kg: 8.25/9.8557mm pipe mounts includedKey Benefits:✔ Wide Visibility – A 960 mm mirror surface enhances the field of vision.✔ Impact-Resistant Material – Plexiglas XT ensures durability and long-term performance.✔ Weatherproof & UV-Resistant – Does not fade, fog, or degrade under extreme weather conditions.✔ Easy Installation – Comes with a 57 mm pipe mounting bracket for simple setup.✔ Versatile Application – Ideal for roads, parking lots, warehouses, industrial sites, and restricted visibility areas...