2 - double-sided: retroreflective elements are located on both sides of the CH column
A - type "A" - the column is not subject to use after a collision
P - material of manufacture, "P" - plastic
1.6 (1.0) - total height (height of the above-ground part)
Characteristics of the signal column plastic S1:
Plastic white with black inserts and a white reflector on one side and red on the other. Overall height 1600mm Width 120mm Thickness 60mm Weight 1.15kg
Road signal bollard - available, available to buy at a low price in UAH.
Road barrier DB03 OB-P-1500Road plastic barrier DB03 1.5 meters long and 1 meter high is designed for use on roads, highways and areas of construction and repair work in order to ensure the safety of people and vehicles. The barrier is portable and can be used for temporary fencing at events, concerts, sporting events, etc.This type of barrier according to DSTU 7168:2010 "Temporary road barriers" refers to the protective barriers OB. The safety barrier DB03 is made of a plastic panel and rubber feet that rotate and can be disassembled if necessary. Sections of a plastic fence are interconnected by special fastening elements. The barrier has a width of 1.5 meters and a height of 1 meter, as well as reflective red and white stripes at the top and bottom of the barrier, which provides reliable protection for the curb or perimeter.Technical characteristics of the temporary road barrier DB03 OB-P-1500:Built-in PVC supports that rotate and remove when neededPanel - PPC high quality impact resistant plasticLength, mm: 1500Width, mm: 50Height, mm: 1000Weight, kg: 13Special design for increased resistance to wind loads.The protective barrier DB03 is easily carried and installed on the road surface without the use of special tools. The barrier has a weight of 12 kg, which ensures ease of transportation and storage and stability under wind loads.Enclosing barrier DB03 complies with the safety requirements for enclosing devices on roads and highways. It protects vehicles and pedestrians from entering dangerous sections of the road and prevents possible collisions...
Mounts for mountingrubber wheel bumpers of the RK and RKS seriesrubber ramps PRConsists of 1 nylon dowel 14x100mmand with 1 screw 10х140mm.The required number of fasteners depends on the number of holes ..
