Stainless steel body. Included: Wall-mounted tensator with a 5 m long pull-out tape and a fastener that is mounted on the opposite wall. The tape is removed from the tensator and attached to the fastener, thereby blocking access.
Bar for road cones - connector 1,5m KON1allows traffic cones to be connected together. Rod length 1.5 m. Suitable for road cones of the KDM and KDMK series.Guard rail connector KON1Diameter - 40mm, length - 1500mmMaterial - hard plastic, orange colorTwo metal hooks on both sides of the rod for connecting to the conesOrange barbellReflective tape in whiteRod for connecting road cones 1.5m KON1 available ..
The most convenient, reliable and time-tested - semi-automatic barrier B8When raised, the barrier arc snaps into place and is fixed at the top point. After that, the arc of the barrier can only be lowered with a key.Semi-automatic parking attendant B8 - specifications:Semi-automatic, self-locking in the up position.To open (lower) the barrier, a built-in lock is used, 3 keys are includedHeight, mm: 550Width, mm: 450Pipe diameter, mm: 43Weight, kg: 8Built-in lock and three keys included. If it is necessary to have access of several people to one barrier, these keys can be replicated.It is also possible to manufacture a series of parking barriers with one secret - so that one key can open all the parking barriers located on the site, or any of them.Parking barriers are in sufficient stock to ensure prompt delivery to facilities of any size.The B8 valet is installed on 4 anchors, for which 4 holes are provided in the barrier. Often the installation takes place directly on the anchor. In case of poor asphalt, the installation surface is pre-concreted.In order to buy a B8 semi-automatic parking attendant at a low price, place an order online or by phone / in messengers.We produce parking equipment in Ukraine. ..