LP03 speed bumps polymer yellow center buy from a warehouse: availability, low price in UAH

Corner fender MKUP1-150-5-250 - specifications:Angular metal wheel chipper with powder coating in one colorLength/width, mm: 150х150Height, mm: 250Wall thickness, mm: 5Installation holes, pcs: 4Ø holes for installation, mm: 1Additionally, it can be equipped with black reflective stickers.Metal corner fenders MKPU1 - scopeMetal corner bumpers are a reliable way to protect shelving corners, columns and wall corners from damage caused by impact from vehicles or other objects. They are made of high quality steel and have increased resistance to mechanical stress.Metal corner protectors are easily attached to the surface in front of a wall or shelving, effectively protecting the corners from damage. Due to their design and the material from which they are made, these fenders not only prevent damage, but also extend the life of racks and columns.In addition, metal corner fenders can be used in a variety of places where protection of corners from damage is required. For example, they can be installed in parking lots, garages or warehouses.As a result of the use of metal corner fenders, the corners of walls, racks and columns will be reliably protected from damage, which will significantly save on the repair and replacement of damaged elements.Buy metal chippers from the manufacturer at a low priceIn order to buy the corner wheel chipper MKUP1, choose the quantity and place an order online.The production time is from 1 to 2 weeks, depending on the volume of the order and the workload of production...

Glue for polyurethane tactile tiles of the PT12 and PT14 series.Also suitable for bonding PT32 tactile tapeGlue for tactile tiles PT-K1-0.47 - characteristics:One-componentSupplied in a PE-Euro cartridgeWeight, kg: 0,47Volume, ml: 370The glue is consumed for approximately 2 m2 of PT.Recommended air temperature when gluing from +5 C to +30 CTime to create a film, minutes: about 7 (At a temperature of 20 C and a relative humidity of 50%)Curing speed, hours: 24Adhesive for polyurethane tactile tiles in stock and available to buy from a warehouse at a low price in UAH.ZUSTRICH  Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

The plastic connector KON03 allows you to connect the road cone with a plastic chain.Suitable for all traffic cones in the range.The connector is pushed onto the cone from above. Has special holes for fastening the chain from four sides.Allows you to form lines that block access not only to cars, but also to pedestrians.Plastic road cone connector with KON3 chain - characteristics:Cone connector with chain, fits all cones KD, KDR, KDM, KDMK.Inner diameter 60mmOuter diameter 112mmThickness 6mmVandal-resistant and durable plasticOrange color4 holes for fastening the chain - the ability to connect 5 cones at the same timeCone road connector with KON03 chain available ..

Heavy-duty metal wheel bumper with powder coating in one color (price for 1 piece)RightLength - 2000 mmHeight - 350 mmThe diameter of the pipe is 159 mmPlate for installation - 200mm x 200mm, thickness 5mm, hole diameter 16mm..

Protection of walls and ramp from damage when heavy equipment approaches the rampRB01 rubber stop bumper for ramp - specificationsHeight 400mm.Width 240mmThickness 100mmWeight 9.4kgHigh quality rubberDistance between holes 120mm and 140mm.Buy rubber protection for the ramp in UAHIn order to buy rubber protection for the ramp at a low price in UAH, place an order online.For organizations - in the comments, indicate the EDRPOU code for prompt invoicing.Persistent bumpers available, we send carriers Nova Poshta, SAT, Deliveri, a dogruz across all Ukraine. Pickup from warehouse is also possible...

Visitor Access Ramp for Cable Crossings PP-KAB-ADA Successful events depend not only on professional equipment and smooth logistics but also on creating a safe and comfortable environment for visitors. Temporary cable routes are often necessary for power distribution, sound systems, lighting equipment, video screens and exhibition installations. However, exposed cable crossings can create obstacles within pedestrian areas. PP-KAB-ADA is designed to provide a safer and more comfortable transition over cable crossings, helping event organizers improve visitor experience and reduce potential trip hazards. Creating Safer Visitor Routes at Events Concerts, festivals, exhibitions, sporting events and public celebrations require extensive temporary cabling. Even when professional cable protectors are used, the crossing point remains elevated above the surrounding surface. The PP-KAB-ADA ramp creates a smoother transition, allowing visitors to cross cable routes more comfortably and safely. Improved Comfort for All Visitors The extended transition design helps improve movement for: Event visitors Parents with strollers Wheelchair users Elderly visitors Event staff Service personnel Equipment carts and trolleys By reducing abrupt height changes, the ramp helps create a more convenient crossing point within busy event environments. Ideal for Festivals, Exhibitions and Public Events The PP-KAB-ADA ramp is suitable for: Music festivals Outdoor concerts Trade shows Exhibitions Sporting events Public celebrations Corporate events Street festivals Temporary pedestrian routes Its highly visible blue surface also helps identify designated crossing locations within crowded areas. Compatible with Professional 5-Channel Cable Protectors The ramp is specifically intended for installation over professional 5-channel cable protector systems. Recommended applications include: KAB2-5 Cable Protector KAB205-SOZI Cable Protector When installed, the ramp forms a convenient crossing point above the protected cable route. Modular Design for Mobile Event Operations The system consists of two sections connected by heavy-duty metal joining plates. All connection hardware is included in the package. This design allows: Easy transportation Fast installation Compact storage Quick deployment between venues Repeated use for multiple events Technical Specifications Model: PP-KAB-ADA Dimensions: 138 × 68–82 × 8 cm Height: 80 mm Top Width: 680 mm Entry Width: 820 mm Material: Plastic Color: Blue Construction: Two-piece modular design Connection: Metal joining plates Load Capacity: Up to 200 kg Benefits for Event Organizers Improves visitor safety Enhances pedestrian comfort Reduces trip hazards Supports accessible event design Works with professional cable protectors Quick and simple installation Suitable for repeated deployments Helps create a more professional event environment PP-KAB-ADA is a practical solution for event organizers seeking to improve safety, accessibility and visitor comfort wherever temporary cable routes intersect pedestrian traffic...

Cone nozzle with red and white retractable tape 3 m red and whiteallows connecting road cones with a tape, which is pulled out of the nozzle and inserted into the nozzle in the adjacent cone.In order to connect two cones, two toppers must be used. Each topper functions as a tensor and has one outlet with a tape and three receivers. That allows you to form squares, triangles and any forms of site fencing.The cone tensor is used for road and repair works. Also in parking lots, warehouses and industrial premises.Nozzle on a cone with a retractable tape 3 meters, tensator, characteristics of KOH08:Belt length, m: 3Tape color: signal red-white.Belt width, mm: 50Belt thickness, mm: 1.5For indoor or outdoor use together with traffic conesThe KON08 topper, together with the traffic cones, organizes and zones the space.Tensor for cone KON08 is suitable for cones of the KD, KDR and KDMK seriesToppers for road cones KON08 in stock and available to buy at a low price in UAH ZUSTRICH Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

Heavy-duty metal wheel bumper with powder coating in one color (price for 1 piece)For ramp protection, for trucksLength - 1500 mmHeight - 350 mmThe diameter of the pipe is 159 mmPlate for installation - 200mm x 200mm, thickness 5mm, hole diameter 16mm..