Length 1830mm. Width 145mm Height 120mm Weight 18.9kg Loading up to 3.5 tons Six reflective elements on both sides For standard parking Consists of one central part (RKS02) and two side parts (RKS01)
The rubber bumper is a prefabricated structure consisting of three parts. Two lateral and one central
Installation of rubber wheel stops RKS03 does not require special lifting equipment. The weight of one section is 6.3 kg, and the entire wheel bumper weighs 18.9 kg.
Each section has 2 holes for fastening; in total, the RKS03 assembly rubber wheel chipper has 6 holes for mounting on KR02 fasteners.
How to buy rubber stops for parking, garage - RKS03 wheel chippers - at a low price?
In order to buy rubber stops for parking, garage - RKS03 rubber wheel bumpers - at a low price in UAH, choose the required quantity and place an order online.
The most convenient, reliable and time-tested - semi-automatic barrier B8When raised, the barrier arc snaps into place and is fixed at the top point. After that, the arc of the barrier can only be lowered with a key.Semi-automatic parking attendant B8 - specifications:Semi-automatic, self-locking in the up position.To open (lower) the barrier, a built-in lock is used, 3 keys are includedHeight, mm: 550Width, mm: 450Pipe diameter, mm: 43Weight, kg: 8Built-in lock and three keys included. If it is necessary to have access of several people to one barrier, these keys can be replicated.It is also possible to manufacture a series of parking barriers with one secret - so that one key can open all the parking barriers located on the site, or any of them.Parking barriers are in sufficient stock to ensure prompt delivery to facilities of any size.The B8 valet is installed on 4 anchors, for which 4 holes are provided in the barrier. Often the installation takes place directly on the anchor. In case of poor asphalt, the installation surface is pre-concreted.In order to buy a B8 semi-automatic parking attendant at a low price, place an order online or by phone / in messengers.We produce parking equipment in Ukraine. ..
Heavy-duty metal wheel bumper with powder coating in one color (price for 1 piece)RightLength - 2000 mmHeight - 350 mmThe diameter of the pipe is 159 mmPlate for installation - 200mm x 200mm, thickness 5mm, hole diameter 16mm..
Protection of walls and ramp from damage when heavy equipment approaches the rampRB01 rubber stop bumper for ramp - specificationsHeight 400mm.Width 240mmThickness 100mmWeight 9.4kgHigh quality rubberDistance between holes 120mm and 140mm.Buy rubber protection for the ramp in UAHIn order to buy rubber protection for the ramp at a low price in UAH, place an order online.For organizations - in the comments, indicate the EDRPOU code for prompt invoicing.Persistent bumpers available, we send carriers Nova Poshta, SAT, Deliveri, a dogruz across all Ukraine. Pickup from warehouse is also possible...
