Mon-Fri from 09:00 to 18:00,
Sat-Sun - day off

Installation of rubber ramps in Kiev

Installation of rubber ramps in Kiev

Installation of rubber ramps
When it becomes necessary to drive a car to a more elevated surface or enter a garage, in these cases it is best to use a rubber ramp. The design will not allow damage to the vehicle and will ensure a smooth and safe entry or exit. Also, a rubber ramp is ideal for loading or unloading goods. The rubber ramp is used to compensate for height differences, since when entering the garage and on the curb, a significant load on the car's suspension occurs, because the wheels overcome the elevated platform. In winter, the task is much more complicated even with the presence of special vehicle tires.
In addition, a rubber ramp allows you to enter or call into a building or garage if, after rain or melting snow, water begins to accumulate at the entrance and flow into the room.
With the help of a ramp, even at dusk, you can not be afraid that the car body may be damaged on the surface of the earth. Also, the rubber structure can easily be installed in another place if the need arose. The device is quite simple, but its main task is to provide a convenient entrance to the room.
Many experts note the strength and reliability of rubber structures, as they can serve for a long time and do not need to be repaired. High-quality rubber ramps must withstand a load of more than 20 tons and are suitable for cars and trucks, as well as for bicycles and strollers of various types.
High-quality devices are made of modified rubber in black, and also applied to the surface of a strip of bright yellow.
Difficulties with the installation of such structures should not arise. To carry out the installation of a rubber ramp, it is necessary to place a rubber corner near the curb and secure it with a dowel or anchor bolts.
When installing the structure, some details must be taken into account. For example, with a small angle of inclination of the device it will be more convenient and easier to make a race and descent. Naturally, the format of the device depends on the type of building and access road.
The installation of the curb during the installation of the structure "on the rise" is to exclude the possibility of the car coming off the ramp. It is necessary to consider the width of the entrance, which should be 20-30 cm larger than the width of the garage, and on the other hand, the rubber ramp should expand to facilitate entry.
If there is a constant problem with the presence of water, you can install a special drainage system with the ramp. Before entering the building or with a garage door, it is necessary to make a recess, and then install a gutter there (preferably concrete). Next, cover the structure with a fairly strong grill to maintain an even entry. Thanks to this, the sewage channel is protected from pollution.
Experts recommend installing a counter ramp, which is designed to facilitate and more convenient exit from the threshold of the garage or premises.

There are no products to list in this category.

icon_viber Viber icon_whatsapp WhatsApp icon_email Email