Road studs VRD2 must be directed by reflective reflectors towards the driver and can be installed both on the road surface and on the curb
Where are the white road reflectors - VRD-3 road studs installed?
Road reflectors of white color are installed
in front of pedestrian crossings
on bike crossings
when dividing opposite sides of traffic in the absence of a dividing strip
to indicate guide islands
Road stud VRD-3-II-P1 - characteristics:
Reflective reflectors on both sides - color: white-white Material - PPC Type according to DSTU 4036-2001: Type II Height, mm: 20 Dimensions, mm: 105x105x20 Weight, g: 110 Installation method - on anchors in the road surface Two anchors for installation included
White road studs VRD-3 are available and available to buy at a low price in UAH
Fasteners for the installation of road posts plastic and rubber series DSConsists of 1 nylon dowel 8x100mm,from 1 screw 6x100mm and washer.The required number of fasteners for installation depends on the number of holes in the road post ZUSTRICH Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..
The total height is 3350 mm. Weight - 33.8 kg. Included:- Ball lamp with a diameter of 300 mm or 350 mm- Decorative polymer plinth with symbols of fertility and abundance and decorative element in the form of grapes - anti-corrosion, 200 frost cycles.- Metal pipe (diameter 76mm, wall thickness 3mm) on a round plate for installation (thickness 3mm), durable powder coating.- Strong embedding plate for concreting with a thickness of 8 mm- A loop for connecting wires- Wire inside the street lamp..