Cone 52cm with a milestone 1.2m DS8-3K

Concrete hemisphere SB05 without painting with a pinAn alignment pin for fixing the hemisphere in one position on the road surface. Built into a hemisphere.This version of the concrete hemisphere without paintingWeight 80kgDiameter 500mmHeight 250mmDelivery method - only self-pickup from production!Installation of concrete hemispheres with a pin:A hole is drilled in the road surface for the depth of the height of the pin.For the impossibility of raising the concrete hemisphere, concrete is poured into the hole.The hemispheres are installed in a given place with a pin in a hole in the road surface. ..

Length, mm: 1200Width, mm: 480Height, mm: 800Weight, kg: 10Barriers are connected by the type of "swallowtail"Hollow, filled with water or sand. In winter - sand or 30% water-salt solution.Resistant to ultraviolet light, temperature -40C - + 60CColor - whiteFilling volume - 100 liters..

Plastic sectional chairs without back ST03Number of seats - 3The length of the section is 1400 mmHeight 450 mmDepth 500 mmWater drainage holesSize of one seat: Height x Width x Depth = 80x460x355mmVery compact in transportation - sections are stacked on top of each other ..

Rubber ramp PR2-5 is a model of a ramp for a smooth ride on a hill with a height of 5+ cmThe height of the PR2-5 rubber ramp is 5.2 cm, which allows it to be used when smoothing road irregularities that have a difference of 5-8 centimeters.This type of rubber ramps is used in warehouses, entrances to garages, entrances, as well as on roads at the entrance to sidewalks.Wide at low heights, these ramps have a sloping surface, which allows them to be used for a smooth ride on curbsmotoristspeople with disabilities, as wellcyclists andparents with strollersHigh quality products and the presence of reflective elements on the surface guarantee the safety of the product and a long service life.Rubber ramp PR2-5 - characteristics:For a smooth ride on a 5cm curbLength, mm: 500Width, mm: 325Height, mm: 52Rubber2 mounting holesReflective yellow coating - 30% of the total surfaceRubber ramp PR2-5 is suitable for curbs 5+ cmRamps in stock and available to buy at a low price in UAHWhat is a rubber ramp for?The rubber ramp is designed to smoothly overcome sudden changes in height by wheeled vehicles, such as cars (trucks, cars), baby strollers, bicycles, wheelchairs, scooters, carts, etc.The rubber ramp PR-2-5 is made of extra strong, abrasion-resistant, reinforced rubber. Able to withstand heavy loads, resistant to deformation, does not require maintenance, resistant to aggressive environments (salts, chemicals, oils), resistant to environmental influences (temperature changes, precipitation), has an anti-slip surface.How is a curb ramp used?Can be used both outdoors and indoors.This rubber check can be either temporary and applied if necessary, or permanent if it is attached with anchors or dowel screws.Where is the rubber ramp used?The rubber ramp is widely used in parking lots, parking lots, in the yards of residential complexes, for entrances to front doors, in places of loading and unloading vehicles, in places where thresholds are overcome, entrances to garages, in warehouse areas, in production workshops, in medical social and public institutions and entrances to them.Where can I order a ramp for a rubber curb?You can order a rubber curb ramp in our company, we always maintain the required volume in our warehouses, our managers will help you place an order and arrange shipment.How to order a ride on a rubber curb?You can use the quick order form on our website, place an order by phone, send a request by e-mail or viber.How to receive the ordered goods?You can receive the goods after payment in our warehouses by self-delivery, or we send it by any possible delivery service, the goods are sent on the day of payment for the order or the next day. ZUSTRICH  Kiev, Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

Signal road pole DS6 is a plastic pole with a length of 1.2 meters.Where are signaling milestones used?It is used on construction sites and during repairs to form a fence together with signal grids PS01 and PS01-7 and stands for the milestone DP6.When used with traffic cones, driving schools are most widely used, since road signal milestones in the cones have visibility from the passenger compartment even when touching a traffic cone with a milestone. That allows you to practice your parking skills and sense of size. Also, cones with milestones are used in competitions, including in drifting, since the milestones in the cones increase the visibility of the cone at close approaches to the cone with the nose of the car.What cones and stands is the DS6 signal pole compatible with?The signal pole is used both in conjunction with road cones of the KDM and KDMK series, and with DP6 stands.The holes in the cones KDM and KDMK are 40 mm, as in the stands DP6. Ideal for the DS6 plastic signal poleSignal plastic milestone - characteristics:Orange plastic length 1200mmDiameter 40mmTwo reflective stripesSuitable for all cones of the KDM seriesand polymer stand DP6Road signal milestone DS6 in stock and available to buy at a low price in UAH  ZUSTRICH  Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

Flexible road curbstone DT03 with a detour sign and a panel with vertical markingsRoad bollard DT03, characteristics:Height, mm: 950Ø of sign, mm: 180-200Ø bases, mm: 210With reflective detour sign and reflective vertical markingWeight, kg: 1Mounting on 3 anchors (not included)Ultraviolet resistantTemperature mode, C: -40 - +60 A flexible signal road bollard with a detour sign is available and available to buy at a low price in UAH ZUSTRICH Kiev, Dnipro, Odessa, Lviv, Kharkiv, Poltava, Khmelnitsky, Lutsk, Rivne ..

The wheel bumper is metal with powder coating in one colorIt is used to protect barriers and columns.Depth - 600 mmWidth - 650 mm (internal 500 mm)Height - 500 mmThe diameter of the pipe is 76 mm, the wall thickness is 3 mPlate for installation 150mm x 150mm, thickness 4mm, holes 12mm..

Characteristics of plastic road barrier with an exhaust tape LTP01 yellow-black 3m:Plastic road barrier with yellow-black pull-out tapeTape length, m: 3Height, mm: 980Weight, kg: 8,5pipe Ø, mm: 70base Ø, mm: 330Base height, mm: 70For outdoor and indoor useThe price is indicated in UAHTo buy plastic racks with ribbons, place an order online or by mail/viber/phone.Plastic racks with an exhaust tape available...

Plastic road water barrier red VB03 1 meterLength, mm: 1000Width, mm: 480Height, mm: 800Barriers are installed one inside the other for easy transportationHollow, filled with water or sand. In winter - sand or 30% water-salt solution.Resistant to ultraviolet light, temperature -40C - + 60CFilling volume of road water-filled barrier- 30 litersAdditionally, the barriers can be interconnected with a 1000 mm long VB03-C connector,..

The signal road battery lantern is shock-resistantLens color: redSize, mm: 220x120x360Bilateral light outputTwo modes of operation: flashing and permanentCompartment for two batteriesAdditionally battery "DF-01-battery" andkey "DF01-key" - for fastening to fences, opening of a compartment with batteries, inclusion and change of operating modes of a lantern ..

Road barrier DB03 OB-P-1500Road plastic barrier DB03 1.5 meters long and 1 meter high is designed for use on roads, highways and areas of construction and repair work in order to ensure the safety of people and vehicles. The barrier is portable and can be used for temporary fencing at events, concerts, sporting events, etc.This type of barrier according to DSTU 7168:2010 "Temporary road barriers" refers to the protective barriers OB. The safety barrier DB03 is made of a plastic panel and rubber feet that rotate and can be disassembled if necessary. Sections of a plastic fence are interconnected by special fastening elements. The barrier has a width of 1.5 meters and a height of 1 meter, as well as reflective red and white stripes at the top and bottom of the barrier, which provides reliable protection for the curb or perimeter.Technical characteristics of the temporary road barrier DB03 OB-P-1500:Built-in PVC supports that rotate and remove when neededPanel - PPC high quality impact resistant plasticLength, mm: 1500Width, mm: 50Height, mm: 1000Weight, kg: 13Special design for increased resistance to wind loads.The protective barrier DB03 is easily carried and installed on the road surface without the use of special tools. The barrier has a weight of 12 kg, which ensures ease of transportation and storage and stability under wind loads.Enclosing barrier DB03 complies with the safety requirements for enclosing devices on roads and highways. It protects vehicles and pedestrians from entering dangerous sections of the road and prevents possible collisions...

Base 25kg for road signs, fences, temporary barriers DP27Suitable for joint use with road markers DS10, temporary road fences DB01, DB02 and supports for temporary road signs.Weight, kg: 25Length, mm: 680Width, mm: 240Height, mm: 140Polymer sandFor temporary road fences, signsBase 25-27kg for road signs available in any quantityBase for signs and temporary road barriers DP27 are available to buy at a low price in UAH ..